 |
5 Port Splitter
For multiple remote sensors this 5 port splitter makes the installation easy. Chain them together to connect up to 16 sensors. One RJ-11 plug, five receptacles, 5 foot cord. White.
|
 |
16 Port Splitter
This splitter is an accessory to the
MiniGoose II and can be used with other Goose climate monitors. It adds
rack mounting to the MiniGoose and provides 16 receptacles for remote
sensors. The MiniGoose is not included.
16 Port Splitter Datasheet
|
|
|
PSTN Auto-Dialer
The relay controlled PSTN auto-dialer add an additional level of alert notification. The unit is especially ideal for notifications in the unusual event of a network failure and also for alert notifications from remote locations where a network
connection is not available for SNMP or E-mail alerts.
PSTN Auto-Dialer Datasheet
|
 |
PowerEgg Zero
Update existing power strips with this in-line power meter. By inserting the meter between the power source (typically a power strip) and the power source (wall plug or PDU) you can easily learn amps, volts, watts and power factor. The values are continually displayed in bright red LED numerals. The standard EGG0-IEC uses C13 and C14 connectors. A kit EGG0-NEMA adds two North American style connectors for 5-15 NEMA connectors. A cord and adaptor easily convert the unit to typical power strip connectors. Using these connectors the EGG0 is rated at 15 amps.
PowerEgg Zero Datasheet
|
 |
Remote Power Manager X2
The Remote Power Manger X2 (RPM X2) adds remote power monitoring and switching capabilities to any Goose Series II ITWatchDogs environment monitors supporting a digital sensor port.
This add-on accessory presents real time logging and graphing of voltage, amperage, real power, apparent power, power factor and kilowatt-hour to provide trend analysis and power metrics for future planning. The device enables users to set alarm thresholds for above mentioned measurements and remotely reboot locked systems or control system power via the secure user interface from anywhere in the world.
|
 |
Temp Rat
Battery-powered, 1-U rack-mount temperature
sensor. Put the end of the included 12' temperature sensor cable in the
hottest spot of your blade server or other high heat-producing
equipment. +/- 0.5°C accuracy. Batteries should last well over a year.
Uses two AA cells (not included, rip them out of your old AM/FM radio).
Unit reads hundreds, tens and units. Cycles between F and C readings.
Low battery alarm.
Temp Rat Datasheet
|
 |
Input/Output Expander (IOE)
The IOE is the first-of-its-kind smart accessory in the environmental monitoring industry offering 32 configurable analog inputs allowing users to monitor and set alarm thresholds for 0—5VDC signal and/or open or closed switches. The addition of three relay outputs enable users to trigger external devices like auto-dialers, strobe lights or backup AC units on alarm or manually through the web interface.
|
 |
POE Splitter & Injector Kit
Put one of these boxes at each end of the
Cat 5 cable and the power is supplied over the Ethernet cable. Maximum
cable length 300 feet. Works with any Goose that uses a wall
transformer power supply.
- Power any Goose units over Ethernet cable*
- Simple connection
- Saves wiring - remote power supply
- 300’ max lengt
- No software required
|
 |
POE Adapter Splitter
The Level One Power over Ethernet Splitter has the option of either outputting a 5VDC or 12VDC power signal from the -48VDC on the DATA IN port. Set 5V or 12V with the dip switch located on the side of the unit. The 12V setting powers a WeatherGoose, SuperGoose, or MiniGoose.
POE Adapter Splitter Datasheet
|
 |
POE Injector
The Level One 1-port Power over Ethernet injector takes a 100-240VAC signal with a maximum current draw of 0.3A. A straight-through CAT5 cable can be routed from a router or hub into the Data In port on the injector. Output is a -48VDC signal carried to the splitter via another CAT5 cable.
POE Injector Datasheet
|
 |
Rack Shelves
4UWR
4U Wall Rack, In addition to 4U equipment mounting space, the 19" wall rack features a 1U power strip mounting location at the base of the rack. This single piece rack is manufactured with 16 guage steel and does not require field assembly.
2URS
2U Rack shelf, front mount shelf with 10.5" depth
3UCMRS
3U Rack shelf, double-sided shelf with overall 20" depth.
|
 |
-48 Volt DC Power Supply
-48VDC Power Supply for use with any ITWatchDogs Environmental Monitor including the MicroGoose, MiniGoose II, MiniGoose XP II, WeatherGoose II, SuperGoose II & RelayGoose II Models. The -48VDC power supply will also work the the following discontinued products: WxGoos-1, WxGoos-2, WxGoos-3 & WxGoos-4.
|
|
|
Power Adapter for Goose Products
Power adapter for MicroGoose, MiniGoose II, MiniGoose XP II, WeatherGoose II, SuperGoose II RelayGoose II & RelayGoose IIP.
Input: 100-240v - 50/60Hz0.5A Max.
Output: 6V 2A
|
