Search

HM Cragg » .. » Control and.. » Environmental.. » ITWatchDogs » Analog Sensors

Testimonials | Meet the Experts | Contact Us

Environmental Monitoring

ITWatchDogs - Analog Sensors

ITWatchDogs - Analog Sensors

Analog inputs show up on the web interface as "I/O" sensors. The default name for each input can be changed to reflect what is attached. Analog sensors generally come in two types: analog voltage and dry contact.

Analog Sensors

	Water Sensor Detect rising water before it ruins your gear. Connects to the I/O ports on the WeatherDuck, WeatherGoose and SuperGoose. Water Sensor Datasheet
	Door Contact The easiest way to know door position. Magnet and magnetic sensor. Simple hook-up to the I/O ports. Door Contact Datasheet
	City Power Monitor Plugs into a standard outlet. Alerts you when city power is lost, so you know how long the UPS has been on. Connects to the I/O port on the WeatherGoose, SuperGoose and WeatherDuck. City Power Monitor Datasheet
	CCAT Analog to Digital Interface Converts an analog sensor into a digital sensor that can be connected to a digital sensor port. Useful for units that don't have an I/O port (like the MiniGoose) or for adding additional analog sensors to a unit that does. The CCAT needs to be programmed for the type of analog sensor that will be connected to it. Several versions are available depending on the type on analog sensor used. When ordering select please choose one of the following types: digital, city power, -48V, current, door contact, smoke, water, or Water Snake. CCAT Analog to Digital Interface Datasheet
	Current Transformer This is a sample of a current transformer that can be attached to a WeatherDuck, WeatherGoose or SuperGoose. Note: A CCAT is required to connect an analog sensor to MiniGoose or MiniGoose II. Current Transformer Datasheet
	-48VDC Sensor Designed to monitor -48 volt telephone batteries this sensor converts the positively grounded batteries into a negatively grounded 0 to 5 VDC signal capable of being monitored be any of the WeatherGoose Monitors. Connects to the I/O port on the WeatherGoose, SuperGoose and WeatherDuck. No separate power supply for this sensor is required. Note: A CCAT is required to connect an analog sensor to MiniGoose or MiniGoose II. -48VDC Sensor Datasheet
	30 VDC Monitor Remotely monitor the charge of 0-30V telephone batteries or cell phone systems.
	WaterSnake Put this cable around the periphery of your server room or around data cabinets and get early warning of water entry. Get an e-mail or page when water hits. Comes with wall mounted control box. Uses two Weather or SuperGoose I/O ports. Reports when the cable is wet, disconnected or faulty. Note: This sensor uses two analog inputs, so two CCATs are required for use with MiniGoose or MiniGoose II. WaterSnake Datasheet
	Smoke Alarm Know when smoke invades your room. The kit contains a standard Kidde sensor plus all the wiring to connect to a WeatherGoose, SuperGoose or WeatherDuck. Up to three per Goose or Duck. Note: A CCAT is required to connect an analog sensor to MiniGoose or MiniGoose II. Smoke Alarm Datasheet
	Photoelectric Smoke Alarm Photoelectric Smoke Alarm for 120VAC/9VDC and 220VAC/9VDC Single or Multiple (Tandem) Station and Specialty Applications 120VAC and 220VAC photoelectric smoke alarm/detector with 9VDC battery back-up as an auxiliary power source in the event of an electrical failure. Features a warning signal for low or missing battery. Smoke Alarm Datasheet
	Carbon Monoxide Alarm 120VAC/9VDC single/multiple station, tandem interconnect capabilities, electrochemical sensor carbon monoxide alarm. Carbon Monoxide Alarm Datasheet