-
Eaton’s SPD Series offers the most advanced surge protection for industrial and commercial applications. It can be installed in two configurations: Direct integration into electrical assemblies or externally side-mounted to equipment. With an array of features, options, and configurations, there is a solution for all electrical applications, including service entrances, distribution switchboards, panelboards and point-of-use applications. -
The Eaton Type II STS transfers electrical loads from one source to another while eliminating the chance of a loss of power to critical equipment by properly coordinating with the electrical distribution system. During a fault condition, the Type II STS continues to conduct current, allowing downstream circuit breakers to work selectively. By incorporating the Eaton Type II STS into your power infrastructure many UPS/building configurations are possible. -
NOTE: This item is obsolete. Please contact us for a replacement model.- 9,600VA to 17,280VA
- Input: 1-Phase 208VAC 50A through 3-Phase 208VAC 60A with 9' power cord
- Standard 1U 19" Rack Mount
- Optional Cable Support Tray System or Vertical Mount Brackets
- (6) C19 Outlets or (12) C13 Outlets
-
NOTE: This item is obsolete. Please contact us for a replacement model.- 1,440VA to 5,760VA
- Standard 1U 19" Rack Mount
- Optional Cable Support Tray System or Vertical Mount Brackets
- Input Options: 120VAC, 208VAC-240VAC, Split-Phase 120/240VAC | 15A, 20A, 30A | 50-60HZ
- Many Input Plug/Outlet combinations available
- UL489 Listed Circuit Breaker Protection
- Spike/Surge Suppression
- Optional Remote IP Current Meter with Ethernet Port
- Optional EMI/RFI Filtering
-
NOTE: Variations of the item are available. Please contact us for help with an equivalent product.- 1,440VA to 5,760VA
- Standard 1U 19" Rack Mount
- (10) Total outlets of either 5-15, 5-20, or 6-15 (2) Convince outlets stay on at all times (un-switched)
- Input Options: 5-15, 5-20, L5-30 120V, or L6-30 240V
- 3-Pin Remote Control EPO Interface (Latching LT or non-latching)
- Option Multiple Time Delay on power-up (MTD)
- EMI/RFI Filtering and Spike/Surge Suppression
- Connect multiple units to a single Remote Control Panel (RCP)
-
NOTE: This item is obsolete. Please contact us for a replacement model.- 3,840VA
- Input: 100-240VAC 20A 50-60HZ
- Standard 1U 19" Rack Mount
- Optional cable tray support and routing system
- C20 Power Inlet allows for flexible 120 or 208VAC input using C19 cord-sets
- (16) C13 Outlets
- 20A Circuit Breaker
- EMI/RFI Filtering and Spike/Surge Suppression
-
- 5,760VA
- Input 120VAC or 208-240VAC 30A
- Standard 1U 19" Rack Mount
- Optional Cable Support Tray System or Vertical Mount Brackets
- Cable can be pre-attached or ordered separately for flexible use
- (16) C13 Outlets or (8) C13 & (2) C19
- (2) UL489 Branch List 15A Circuit Breakers
- EMI/RFI Filtering and Spike/Surge Suppression
-
NOTE: Variations of the item are available. Please contact us for help with an equivalent product.- 1,440VA to 2,880VA
- Automatically transfer loads between a primary and secondary source of power
- Perfect for application where equipment needs redundant power but only has (1) or (3) power supplies in a 2-feed system
- Standard 1U 19" Rack Mount
- Input Options: 5-15P, 5-20P, and 240V 15A (no plug)
- Outlets: (8) 5-15, 5-20, or 6-15
- Circuit Breaker and Status Lights
- Automatic Transfer Switch (ATS)
- Not suggested for use with out-of-phase power sources; for those applications use the T2235 series
-
NOTE: This item is obsolete. Please contact us for a replacement model.- 1,440VA to 5,760VA
- Automatically Transfer loads between a primary and secondary source of power
- Perfect for application where equipment needs redundant power but only has (1) or (3) power supplies in a 2-feed system
- Standard 1U 19" Rack Mount
- Spike/Surge Suppression
- Optional EMI/RFI Filtering
- Automatic Transfer Switch (ATS)
- Input Options: 5-15, L5-15, 5-20, L5-20, L5-30, L6-30 plugs and C20 inlet
- Outputs: 120V Models have (8) 5-15 or 5-20 outlets 240V 30A Models have (12) C13 or (4) C13 and (2) C19 outlets C20 Inlet Modes have (8) C13 and (1) C19 outlets
- Sources DO NOT need to be in-phase
-
- 1,920VA to 3,840VA
- Standard 1U 19" Rack Mount
- (12) C13 Outlets
- C20 110-125VAC or 208-240VAC
- 3-Pin Remote Control EPO Interface (Latching LT or non-latching)
- Option Multiple Time Delay on power-up (MTD)
- EMI/RFI Filtering and Spike/Surge Suppression
- Connect multiple units to a single Remote Control Panel (RCP)
-
NOTE: This item is obsolete. Please contact us for a replacement model.- 8,640VA
- Input: 120/208VAC 3-Phase WYE, 30A per phase
- Similar to the TPC4100 series but with EPO interface
- 3-Pin Latching Remote Interface (EPO)
- Connect multiple units to a single Remote Control Panel (RCP)
-
NOTE: This item is obsolete. Please contact us for a replacement model.- 8,640VA
- Input: 120/208VAC 3-Phase, 20A or 30A, 50-60HZ
- Standard 1U 19" Rack Mount
- Optional Cable Support Tray System or Vertical Mount Brackets
- (12) 15A 5-15 or 6-15 Outlets or (12) 20A 5-20 or 6-20 Outlets (T Style)
- (3) UL489 Branch Listed Circuit Breakers (15A or 20A)
- EMI/RFI Filtering and Spike/Surge Suppression