- 1,440VA to 5,760VA
- Vertical Mounted 42" or 70" long (38" or 66" respectively with alternate mounting)
- Input Options: 120VAC, 208VAC-240VAC, Split-Phase 120/240VAC | 15A, 20A, 30A | 50-60HZ
- Many Input Plug/Outlet combinations available
- UL489 Listed Circuit Breaker Protection
- Spike/Surge Suppression
- Optional Remote IP Current Meter with Ethernet Port
- Optional EMI/RFI Filtering
-
NOTE: This item is obsolete. Please contact us for a replacement model. -
NOTE: This item is obsolete. Please contact us for a replacement model. -
NOTE: This item is obsolete. Please contact us for a replacement model.- 2,840VA – 11,520VA
- Vertically Mounted 70" Long
- Input: 100-240VAC 50/60HZ 1-phase
- Multiple C20 or C14 Power Inlets
- Between (12) and (24) outlets
-
NOTE: This item is obsolete. Please contact us for a replacement model.- 1,920VA or 3,840VA Models
- Vertically Mounted 70" Long
- Input: 120VAC L5-20P or 240VAC L6-20P, 20A 1-Phase
- Optional Remote IP Current Meter with Ethernet Port
-
Eaton Visual Power Manager (VPM) is an easy-to-use, comprehensive power monitoring software to visualize your power infrastructure and take necessary actions to maintain continuous uptime of critical applications. This will ensure you stay on top of power management while still focusing on the bigger picture: running your data center efficiently and effectively. -
NOTE: This item is obsolete. Please contact us for a replacement model.- 1,440VA
- Input: 101-144VAC 50/60HZ
- Output: Regulated 120VAC +- 5V
- EMI/RFI Filtering and Spike/Surge Suppression
- C20 Power Inlet
- 010-9334 power cable included (C19 to standard 5-15P)
-
The Eaton range of 6V and 12V Valve Regulated Lead Acid (VRLA) batteries are suitable for a wide range of applications where high-reliability is essential. -
- 2.75 cu. ft. cabinet
- Pair of Tyvek body coveralls
- Pair of rubber boots
- Headgear & face shield
- Pair of goggles
- Pair of rubber gloves
- Roll of duct tape
- pH test kit
- Five lbs. of Neutrasorb (Acid Absorbent & Neutralizer)
-
An EnviroCoat acid-resistant epoxy option EnviroGuard's flagship design Coated in "Safety Yellow" PVC Acid resistant Optional UL listing with Class A fire-rated liner Modular design allows for simplistic future expansion Can be configured to fit most applications -
Cost-effective containment solutions- Fast & easy installation
- Class A fire rating
- Pans available in polypropylene, fiberglass, and stainless steel
-
Used in wet-cell battery applications, the Eagle is a UL Listed, patented, liner based, spill containment system that complies with local, state and federal regulations. It has a Class 1 fire rated, corrosive resistant, pre-formed liner and metal barrier walls with an acid-resistant, safety yellow coating. Also available in grey. -
Eyewash stations are a required safety precaution for hazardous battery rooms or other environments with potentially dangerous chemicals present. Prevent serious eye injury in the case of an emergency with eyewash stations from Enviroguard. -
Specially designed for sealed batteries & battery cabinet applications- Fast & easy installation
- UL-listed system, utilizing Class A fire-rated liner
- Quick-slip barrier allows easy-access battery cabinets
- Can be configured to fit most applications
-
OSHA-approved personal safety products can minimize the potential chemical hazards present in a battery testing environment. Personal safety kits contain gloves, goggles, sleeves, aprons, and ear plugs to protect employees from chemical sprays and acid spills. -
Relay rack tray containment solution- Corrosive-resistant liner ensures reliable spill protection
- Components offer high acid resistance and dielectric properties
- Easy-access design allows for convenient removal of batteries
- Fits standard 19" and 23" relay rack trays
-
- 20 gallon D.O.T. container
- Two 4” x 24” SOCs
- Two pairs of Tyvek full body coveralls
- Two sets - headgear and face shield
- Two pairs of rubber boots
- Two pairs of goggles
- Two pairs of rubber gloves
- Shovel and brush
- Roll of duct tape
- pH test kit
- Ten lbs. of Neutrasorb (Acid Absorbent & Neutralizer)
-
- Five-gallon D.O.T. container
- Pair of Tyvek body coveralls
- Headgear and face shield
- Pair of rubber boots
- Pair of goggles
- Pair of rubber gloves
- Roll of duct tape
- pH test kit
- Five lbs. of Neutrasorb (Acid Absorbent & Neutralizer)
-
- 55 gallon D.O.T. container
- Seven 4” x 24” Neutralization & Absorption SOCs
- Two pairs of Tyvek full body coveralls
- 16 oz. bottle pH7 (spray bottle)
- Shovel
- Broom head (18”) with collapsible handles
- Squeegee head (18”) with collapsible handles
- Two pairs of goggles
- 16 oz. bottle pH7 (spray bottle)
- Two pairs of rubber gloves
- pH test kit
- Roll of duct tape
- Two sets - headgear and face shield
- 40 lbs of Neutrasorb (Acid Absorbent & Neutralizer)
-
Keep your battery rooms and hazardous workplaces clearly marked with highly visible safety signs approved by OSHA and the NFPA. -
Keep your battery rooms and hazardous workplaces clearly marked with highly visible safety signs approved by OSHA and the NFPA. -
Falcon NEMA Rated / Outdoor UPS Systems Pre-configured (1kVA to 6kVA) -
Falcon SL LiFePO4 UPS (Lithium Iron Phosphate) – 1kVA to 3kVA Falcon Electric’s LiFePO4 UPS families are advanced and safe. Designed with lithium iron cathode material, they offer the advantages of 3 to 4x longer battery runtimes, light weight, small footprint and a long service life of 10 + years. -
Falcon SSG Industrial Wide-temperature UPS (1.5kVA to 6kVA) -
Falcon SSG Industrial LiFePO4 UPS (Lithium Iron Phosphate Battery) – 1.5kVA to 3kVA Falcon Electric’s LiFePO4 UPS families are advanced and safe. Designed with lithium iron cathode material, they offer the advantages of 3 to 4x longer battery runtimes, light weight, small footprint and a long service life of 10 + years.