The Single Cell SCR Battery Charger from HindlePower allows portable charging of an individual battery cell.
-
The quick and easy way to connect to your DC battery trailer. The Trailer Connection Panel offers a quick, safe and secure connection between your DC trailer and your substation. This standard design creates uniformity throughout your grid. -
Protect your operation with HindlePower’s Universal Maintenance Charger. -
The Grid | Power FNC nickel cadmium battery is based on unique fiber structure technology. Here, the active material is incorporated into a fleece consisting of nickel-plated plastic fibers, which creates a stable electrochemical connection between the components. The FNC battery can therefore withstand the highest shock and vibration stresses and has a long service life and cycle life even under extreme temperature conditions. Due to the four available performance classes X, H, M and L, a very wide range of stationary UPS applications can be optimally covered. High-current discharges in diesel generator applications up to long-term discharges in classic UPS systems can be carried out efficiently with the appropriate battery type. Especially in applications with extreme temperature influences, the Grid | Power FNC succeeds with its long service life and thus reduces the replacement intervals and costs for a new battery system. -
The Grid | Power V L (series OPzS) is a low-maintenance, vented lead-acid 2V cell in conventional technology with liquid electrolyte (dilute sulfuric acid). OPzS batteries are among the longest-lasting lead batteries and are reliable energy suppliers with a long service life and the highest level of reliability, even for critical applications. The vented lead-acid batteries consist of positive tubular plates and negative grid plates and, due to their structure, offer an extremely long cycle life. This is achieved by the protection of the active material through the woven polyester gauntlets. They are therefore ideal for use in areas with high cyclical and capacitive loads, such as energy supply systems, telecommunications equipment or long load times (between 1 h and > 10 h) for safety lighting. The Grid | Power V L is therefore a guarantee for maximum operational safety in your application. -
Hoppecke's Grid Power (V M) (OSP.HC / OSP.HB) is a vented lead-acid battery that was developed for critical and safety-relevant applications. In applications such as energy supply, a reliable UPS (Uninterruptible Power Supply) is of crucial importance. This product can also deliver very high amounts of energy in ranges of 1min-5h thanks to the high-current-compatible grid design. In addition, the high capacity density of the product can save you a lot of money and space. The DIN compatible batteries are transparent (ease of maintenance) and can be easily exchanged because they fit in the common DIN cabinets, and are in accordance with IEC60896. -
Sodium Metal Chloride batteries are the latest generation of secondary batteries developed specifically for heavy industrial application constraints. They use metal-based cathode and molten sodium anode to provide exceptionally safe and reliable power backup that is enclosed in the industrial-grade steel case and equipped with integrated battery monitoring. Stable chemical reaction, zero maintenance and insensitivity to temperature and storage aging, make them one of the best choices for oil & gas, power generation, transmission and distribution, communications, rail and other industrial uses. -
Majorsine Power Inverters from Majorpower feature the integrated utility bypass and pure ac sine-wave output from a DC source input. Designed for high Mean Time Between Failure, these inverters provide the dependable AC power that critical networks in Telecom and Utility applications demand. -
Majorpower's Majortel DC Power systems (MTS) meet or exceed most equipment application requirements for today’s growing new technology networks. The MTS system includes telecom-grade switch-mode 48V rectifiers in a feature-rich mounting shelf with integrated remote communication package. Each shelf is 1.75” tall, 11” deep and occupies a standard 19” wide rack space. -
Majorpower's Majortel MTD DC-DC Converters are feature rich power conversion systems that offer flexibility and redundancy to the critical network architecture. The Majortel 1U Converter system is a compact rack mounted design that supplies critical equipment solutions requiring 24V or 48V DC from a 125-130V DC power source or electric utility provider substation battery. Each DC-DC converter system is designed to occupy a true 1U (1.75” height) rack space in a standard 19” width rack and under 11” deep. -
CELLGUARD SYSTEM-GEN-2 combines wireless communication with patented, field-proven battery conductance analysis technology. It lowers total cost of ownership while providing the most thorough and easy to access stationary battery health diagnostics offering -
Midwest Battery Supply carries Replacement Battery Cartridges, designed specifically for APC by Schneider Electric UPS systems. The cartridges are 100% APC compatible and require no assembly or wiring.- 100% APC compatible
- OEM quality without OEM price
- Plug & Play
- 2-year warranty
- Assembled in USA
-
Mobile DC power where you need it...when you need it!
Do you have backup power situations where you need accessible and portable emergency or temporary DC power for critical facilities? Or need reliable, temporary DC power when a critical stationary battery or DC power system is required to be taken out of service for maintenance and/or testing? HM Cragg has a solution for these and many more backup power situations with our Mobile DC Power System. This is a fully customized and furnished portable backup-power unit designed, engineered and built in-house that caters to electric utility and telecommunications applications. Each DOT compliant unit is constructed to meet the unique specifications and system requirements of each customer.Ideal DC Power solution for:
- Electric utilities for switchgear & control and communications, including substation and generating stations and NERC Std. PRC-005 compliance
- Telecommunications, including central offices, remote switching offices and wireless sites
Watch our product showcase video on the Mobile DC Power System here:
-
Plug Power’s GenSure hydrogen fuel cell solutions provide scalable, clean, cost-effective performance while offering an unparalleled degree of flexibility in addressing the space and runtime constraints of customer locations, with both indoor shelter and outdoor cabinet options. -
The P4600 series battery charger by Primax is the evolution of their microprocessor-controlled “Thyristor” (SCR) based rectifier. Its advanced features allow communication, battery monitoring and maintenance automation at your fingertips. NERC compliance standards are facilitated. The P4600's user-friendly touchscreen display allows one to access all parameters in a visually interactive format. This optimal communication feature provides the ability to remotely and securely interact with all of the system parameters and set-up features including Primax's unique battery monitoring and maintenance capabilities. -
With one easy to install cabinet, the Primax P600 EZ-Swap will fit most substation applications. All installation and servicing operations have been simplified using intelligent modular design. Minimum technical knowledge and experience is needed to install, operate, maintain and service the P600 EZ-Swap. High frequency technology reduces the overall size and weight up to 80% compared to traditional chargers. -
The portable P600 Flex Power from Primax is a compact battery charger, having low ripple and THD for clean power efficient battery recharge and sensitive equipment. It’s user-friendly menu with its ergonomic and lightweight design makes it easy to carry for service calls where a temporary charger is needed. This charger can provide up to 35A at 125Vdc and 65A at 24Vdc or 48Vdc perfect for substation needs. It can also be used for permanent installations or to rehaul outdated chargers without disturbing your actual infrastructure. -
The Primax P600 Hot Swap series delivers modular and cost-effective solutions for your DC backup systems. Packaged as a single module unit or within a complex system, the P600 meets your application’s demands. The broad range of controls and options fits virtually any DC backup specification while offering better efficiency and communication. -
The P850i series inverters (DC to AC converters) from Primax are designed based on an insulated-gate bipolar transistors (IGBT) operating at high frequency to provide clean AC power from your existing DC bus. These 125kVA inverters are available with 125Vdc in single or three phase output. 250kVA can be provided from a 250Vdc bus. Inverters with up to 600Vdc bus are also available. -
Flex'ion Gen 2 sets a new standard for uninterruptible power supply (UPS). Manufactured in Europe, Flex'ion Gen 2 new lithium-ion battery solution provides up to 220 kW per cabinet, boosting power performance by 40 percent compared with the first generation Flex’ion. Designed for data centers and other mission critical UPS applications such as hospitals and industrial processes, the Flex’ion Gen2 is compact, lightweight and capable of operating continuously at high temperatures. Its low-cobalt content of less than 1% and primary materials sourced from responsible suppliers under the Responsible Materials Initiative (RMI) enables a highly sustainable and environmentally friendly system. Flex’ion Gen2 li-ion battery system has passed rigorous testing under the UL 1973 and UL 9540A method. It is certified for use:- Without a built-in fire suppression system, placing Flex’ion at the highest level of safety
- Without an air separation gap between cabinets, minimizing the space required and the Total Cost of Ownership (TCO) of the data center overall.
- Other factors that reduce the TCO are the long calendar life of over 20 years, the low maintenance and the lightweight design. Li-ion batteries are six times lighter than valve-regulated lead-acid batteries (VRLA).
-
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. ARE Series analog single phase chargers have many inherent advantages: voltage regulation, short circuit protection, low operating costs (a combination of high efficiency and high power factor), easy maintenance and high reliability. Those advantages are combined with advanced rectifier, control and filter circuitry, and user-oriented packaging. Designed specifically for utility and communication applications, the ARE Series analog single phase chargers are easily adjusted to meet your specific operating requirements and will provide years of low-maintenance service. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Simplified operation, minimum maintenance and long, economical service are a few of the advantages you get with an ARR Series analog 3 phase charger. Electrical and mechanical design features make it ideal for a wide variety of utility, industrial and other standby power supply applications. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Simplified operation, minimum maintenance and long, economical service are a few of the advantages you get with an ARR-M Series 3 phase utility charger. Electrical and mechanical design features make it ideal for a wide variety of utility, industrial and other standby power supply applications. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Aspiro DC Power Systems are compact and power efficient, with 95% efficient rectifiers. They are available in 1U and 2U form factors from 45-90 amps, with the 90 amp model NEBS Certified. All units feature field replaceable controllers and intelligent battery management. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Rack, rail, and wall mount battery disconnects provide overcurrent protection and a disconncting means for a string of batteries for testing or maintenance -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 800-672-7244 or here. Unipower's Bravo modular inverter systems provide customers with a highly efficient and modular AC or DC power solution. The Bravo inverters offer a modular and fully scalable solution using hot-swap inverter modules at 2.5kVA 120VAC or 3kVA 230VAC. The Bravo EDI and TSI models are compact 2U (3.5 inch-high) rackmount inverters that can be configured with up to four 2.5kVA modules totaling 10kVA in a single 2U shelf. Units can be connected in parallel to increase the overall output of the inverter system and the hot-swappable modules can also be configured with N+1 redundancy. Moreover, the Bravo models provide an extra AC input to ensure a high overall efficiency that results in a reduction of energy loss and heat dissipation. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Unipower DC Distribution Panels include breaker and fuse panels that are 1RU or 2RU high and 19 inch or 23 inch rack mounting. Single and dual bus versions are available with operating voltages on 12V, 24V and 48V. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Fuse panels provide distribution and overload protection for 10 or 20 circuits -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Connect multiple pieces of power board equipment with ground and termination panels -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Guardian DC Power Systems come in several form factors and power ratings. Rack mounted systems range from 180 amps to 1200 amps. Cabinetized systems are available up to 6,750 amps. A 24/48 VDC system is also available. Filed replaceable controllers and a variety of breaker layouts make the Guardian a fit for a plethora of applications. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Unipower’s series of low-voltage disconnect panels are designed for maximum flexibility. They can be connected for either load or battery disconnect. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. Controlled ferroresonant single phase chargers feature voltage regulation, short circuit protection, low operating costs (a combination of high efficiency and low power factor), easy maintenance and high reliability. The Micro ARE-M Series of ferroresonant single phase chargers combines those features with advanced rectifier, control and filter circuitry, and user-friendly operator interface. Designed specifically for utility and communication applications, the Micro ARE-M Series ferroresonant single phase chargers are easily adjusted to meet your specific operating requirements and will provide years of low maintenance service. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. SCR controlled single phase chargers have many inherent advantages…voltage regulation, short circuit protection, low operating costs (a combination of high efficiency and high power factor), easy maintenance and high reliability. The Micro ARE-S Series of scr controlled single phase chargers combines these inherent advantages with advanced rectifier, control and filter circuitry, and user-friendly operator interface. Designed specifically for utility and communication applications, the Micro ARE-S Series scr controlled single phase chargers are easily adjusted to meet your specific operating requirements and will provide years of low maintenance service. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. The SAGEON®II Power Module is part of the SAGEON Family of DC Power Plants which all feature a common controller, monitor and control software, and remote communications modules; eliminating the learning curve. The Sageon®II PM Distribution systems is another member of the Sageon Family, this distribution coupled with a Sageon®II Power Module gives you flexibility in mid range DC Power. The system capability ranges from 200A, 400A to 600A with a 20 breaker or 40 breaker distribution selections. As a member of the Sageon family, it has all the capabilities and performance of the Sageon controller functions and accessories. The Sageon®II system comes ready to mount in a mid-mount configuration for installation into standard 19” or 23” relay racks. Flush mount options are available for use with our welded/tiered assemblies. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. The SAGEON Micro 200 amp DC power system delivers the unmatched capability of a full size SAGEON Power System in a compact and cost effective solution. Designed to deliver up to 200 amps of power for 24 volt or 48 volt systems, the Micro Power Module provides the flexibility to put power where it is needed. The Micro Power Module also offers the flexibility to configure the best solution for your needs with options including integrated battery disconnects and load distribution; all in space saving configurations from two through seven rack units. The SAGEON Micro 200 amp DC power system consists of a power frame that includes the SAGEON Controller, mechanical mounting for up to seven SAGEON Micro Rectifiers, all inter-system cabling, and optional items including AC input breakers, battery disconnects, DC distribution breakers and fuses, and remote communications – all factory installed and tested. Installation cost and time are minimized because there is only one component to install. To complete your system simply connect your AC and DC cables, plug-in the SAGEON Micro Rectifiers, and you are ready to go. In addition to the basic control functions, the SAGEON Micro 200 amp DC power system supports all of the advanced functionality available in a SAGEON Power System including; remote monitor and control, battery testing, individual cell monitoring, programmable battery recharge current, and site monitoring. -
NOTICE: Unipower has ceased operation. For assistance with equivalent products, please contact us at 913-722-3191 or here. The SCIMITAR Series are 1kVA and 2kVA inverters which are 19” rack-mountable and only 1RU high. They operate from a 12V, 24V or 48VDC source and produce a 115 or 230VAC output. The tightly regulated low distortion 50 or 60Hz sine wave is produced by DSP controlled power circuits using an advanced high frequency, pulsewidth modulation technique which achieves up to 92% efficiency. A built-in Static Transfer Switch allows connection of a utility or other AC power source which can be switched to the load automatically in the event that the inverter switches off. In normal operation these inverters isolate the load from wide voltage swings , transients and noise usually present in the AC utility and which can cause equipment reliability problems. Output voltage and frequency are programmable from the front panel, as well as Baud Rate for the RS232 communications interface which can be used for remote monitoring.