-
The VAC Rackmount AC to DC Power Distribution Unit is a 5 port AC power block for the consolidation and distribution of AC input power. Single or three phase options. Each Powergrid™ Power Distribution block allows for the power bus distribution or consolidation of an AC power flow at a 1:4 ratio and can be utilized to connect up to four Powergrid™ ruggedized UPS or the Powergrid™ UPS battery expansion module systems to a single AC power source. Each of the four output ports (P2-P5) are supported by a independent push/pull breaker allowing primary power to each UPS or battery expansion module to be disconnected from the primary power bus by the user as required. The mounting brackets are designed to be removable or rotated either 90°/180°/270° to allow maximum mounting flexibility. This unit can also be utilized to consolidate VAC outputs of a stack of Powergrid™ UPS units and provide long line connection for a remote RPIM. -
The VDC Rackmount DC to DC Power Distribution Unit is a 5 port DC power block for the consolidation and distribution of DC power. Single or three phase options. Each Powergrid™ Power Distribution block allows for the power bus distribution or consolidation of an AC power flow at a 1:4 ratio and can be utilized to connect up to four Powergrid™ ruggedized UPS or the Powergrid™ UPS battery expansion module systems to a single AC power source. Each of the four output ports (P2-P5) are supported by a independent push/pull breaker allowing primary power to each UPS or battery expansion module to be disconnected from the primary power bus by the user as required. The mounting brackets are designed to be removable or rotated either 90°/180°/270° to allow maximum mounting flexibility. This unit can also be utilized to consolidate VAC outputs of a stack of Powergrid™ UPS units and provide long line connection for a remote RPIM. -
MIL-Trans Series™ is a ruggedized COTS military compliant transformer system built for deployment and operations equipment. This unit is available to all the military industry, homeland security and government contractors. Light weight auto transformer built for reliability, this fully ruggedized system is ready for world wide deployment. The MIL-Trans Series™ provides AC voltage conversion from 50 to 5000VA. These systems have internal surge suppression and wide temperature ranges. This unit is built with 120 thousandths aluminum walls and mounts. The system has a high end, built in breaker that is externally resettable. Our rugged tactical power transformer has been designed for ruggedized for field use, -40 to 70C operation, light weight auto transformer, environmentally sealed, external resettable breaker, solid and stackable, up to 5000VA and custom configurations are available. -
Military Ruggedized Redundant N+1 Pluggable – 1U 500 to 3000 watts power supply is a ruggedized military compliant pluggable power supply system built for deployment and operations equipment. These units are available to all military, homeland security and government contractors. They are built for a very low EMI signature and very high reliability rate. This ruggedized power supply system will keep your product up and running for many years to come. The MIL-PLG Series™ is a 1U rack mount, single output voltage, rugged pluggable power supply system that provides up to 1500 watts N+1 or 3000 Watts non-redundant. Each plug in module has hot swap capability and is field replaceable. It comes with N+1 redundant power or standard multiple outputs. -
The military ruggedized universal input tactical power conditioner has unique features designed to meet all the military standards. This system has many unique features such as over voltage, over current, over temperature and short circuit protection. Stainless steel side rails allow for multiple rack depths and the system has field replaceable filters and fans. This system also contains a 24VDC emergency input that will allow for the system to be powered from any 24VDC source if or when AC inputs are not available. EMI/EMC – The conditioner system has been designed to comply with all of the radiated emissions, susceptibility and conductive emissions requirement of the applicable sections of MIL-STD-461E. These techniques have been used successfully by AJPS to comply with these standards many times in the past. The following is a list of methods used for controlling emissions:- Metal chassis with gaskets on all non sealed interfaces.
- EMI filters on all input and output power lines.
- Internal circuitry shielded and isolated
- Ground planes used for noise isolation
- Connectors area isolation from conversion area
- External line filter and shielded cables required
-
The MIL-SEALED Series™ is a military sealed IP67 AC DC power supply family that provides high reliability with COTS availability and affordability in a product that performs under extreme conditions even submerged under water. Our military sealed IP67 AC DC power supply provides reliable, cost effective AC to DC sealed power solutions. The MIL-SEALED Series™ offers a highly reliable standard commercial off the shelf solution while providing shortened lead times in a rugged design. The MIL-SEALED Series™ from AJPS operates from wide range AC input (90 – 264Vac) and is available in standard output voltages of 12, 24 and 48 VDC. Each product is hermetically sealed and carries an IP67 rating for ingress of dirt/dust and water. The products are cooled via natural conduction/convection (no air flow needed) supported by ultra high efficiency up to 94%. Units can be operated in series for higher power applications. -
The MIL-SEALED Series™ is a military sealed waterproof IP65 AC DC power supply family that provides high reliability with COTS availability and affordability in a product that performs under extreme conditions even submerged under water. Our military sealed IP65 AC DC power supply provides reliable, cost effective AC to DC sealed power solutions. The MIL-SEALED Series™ offers a highly reliable standard commercial off the shelf solution while providing shortened lead times in a rugged design. The MIL-SEALED Series™ operates from wide range AC input (90 – 264Vac) and is available in standard output voltages of 12, 24 and 48 VDC. Each product is hermetically sealed and carries an IP67 rating for ingress of dirt/dust and water. The products are cooled via natural conduction/convection (no air flow needed) supported by ultra high efficiency up to 94%. Units can be operated in series for higher power applications. -
The Military Sealed 300W AC DC power supply from AJ’s Power Source Inc. is an environmentally sealed, military qualified, compact, high efficiency COTS power supply designed for use in critical applications where dirty/dusty conditions and water ingress is a concern. The IP67 ingress protection rating and fanless cooling allows for highly reliable operation under the most adverse conditions. Our newest product is a 300 Watt 28VDC output unit available with an AC input to run from general purpose mains power or a Tactical Generator. The power supply will safely power critical systems while filtering voltage spikes and dropouts typically seen where power quality is poor. With a compact form factor and light weight, the power supply can easily be integrated into existing equipment or mounted externally. The MIL-PWR-SEALED-H-F generates less heat than comparable power conversion devices facilitating outstanding thermal management resulting in very high reliability and the smallest package available for a product of its type. -
The Military Sealed 300W DC DC power supply from AJ’s Power Source Inc. is an environmentally sealed, military qualified, compact, high efficiency COTS power supply designed for use in critical applications where dirty/dusty conditions and water ingress is a concern. The IP67 ingress protection rating and fanless cooling allows for highly reliable operation under the most adverse conditions. Our newest product is a 300 watt 28VDC output unit available with an DC input to run from military vehicle power (per MIL-STD-1275) or battery power . The power supply will safely power critical systems while filtering voltage spikes and dropouts typically seen where power quality is poor. With a compact form factor and light weight, the power supply can easily be integrated into existing equipment or mounted externally. The MIL-PWR-SEALED-G-B generates less heat than comparable power conversion devices facilitating outstanding thermal management resulting in very high reliability and the smallest package available for a product of its type.
-
AC to DC power supplies specifically designed to convert shipboard AC mains power to a stable, distributable DC voltage to be used in zonal power management systems. AJ's AC to DC power supply will filter out transient voltages to provide a clean and stable power bus for sensitive equipment. The highly reliable and rugged power supply can be sized to meet your exact power needs up to 14,400 watts. The power supply is designed to meet applicable MIL Standards including MIL-STD-1399, MIL-STD-461, MIL-STD-810. -
The AJ’s backplane system for shipboard zonal power management provides a stackable and flexible power solution with user interfaces. Backplane systems are available in sizes from 3U to 10U housing as many as 10 UPS modules or battery modules. The backplane provides a stackable and flexible power solution with user interfaces including electrical connections, circuit breakers and system communication ports in a compact design that fits into standard 19 inch equipment racks. SNMPv3 signals provide network monitoring of entire system. Connect the backplane System to an optional COTS Power Distribution Unit (PDU) for additional functionality and interconnection to shipboard systems. -
The 1500 UPS-BPM AC Output is a Rugged 1200 Watts / 1500 VA full double conversion rackmount uninterruptible power supply in a 1U (1.73” high) chassis that is 21.75” in length, weighing in at 27 pounds. It is designed for incorporation Into the Powergrid™ BPM system. The design represents the latest advancement in rugged power electronics providing highly reliable power management services for mobile, battlefield, and harsh industrial environments. The technology is implemented with a stacking design that allows multiple Powergrid™ 1500 units to be interconnected. The Powergrid™ 1500 VA / 1200 watts DC UPS provides selected AC output power services for the power support of VAC based user equipment. The VAC model can be configured to provide either 120V 60hz or 230V 50hz fully regulated power while maintaining its global AC/DC auto sensing auto switching input power capabilities. The PG1500 UPS provides a highly sustainable field VAC power source that is fully supported by our proprietary Advanced Cold Pak™ battery design.